omnet | ns-2, ns-3 Project and Research Help Forum

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

ns-3 vs OMNeT++ – Why ns-3 is Often Good From a Ph.D. Scholar’s Point of View

This article provides a Ph.D.–centric comparison of ns-3 and OMNeT++, written from the actual expectations of a CSE/ECE doctoral scholar (problem depth, publishability, model credibility, extensibility, and long-term research value), […]
ns-3, Omnet++
Installing Misbehavior Detection (F2MD) Framework Under OMNeT++.

Misbehavior Detection (MBD) MBD in Cooperative Intelligent Transport Systems (C-ITS) refers to the process of identifying and detecting improper or malicious behaviour exhibited by vehicles or entities within a cooperative […]
Omnet++, Research, Restricted Articles, SUMO
Installing OMNet++ IDE Under new Windows11 Version Using WSL

The Windows Subsystem for Linux (WSL): The Windows Subsystem for Linux (WSL) lets developers run a GNU/Linux environment — including most command-line tools, utilities, and applications — directly on Windows, […]
3D Network Simulations, Articles for Beginners, ns-3, ns-3 Installation, Research, Restricted Articles
Installing FLoRa under OMNet++ for doing IoT ADR Simulation.

FLoRa – Framework for LoRa FLoRa (Framework for LoRa) is a simulation framework developed by Mariusz Slabicki, Gopika Premsankar for carrying out end-to-end simulations for LoRa networks. It is based […]
Omnet++, Research, Restricted Articles
Installing OMNeT++ 6 on a 64-bit Debian 10 Under Chroot-Jail

This article explains the way of installing OMNeT++ 6 on a 64-bit Debian 10 Chroot-Jail which was set up under a Debian 11 Native installation. (A Debian 10 chroot jail […]
Omnet++, Restricted Articles
Installing SUMO, OmNet++ and Veins for doing VANET Research.

This article explains the installation of SUMO, OmNet++ and Veins for doing VANET Research. We can do a VANET research in an integrated manner using these three pieces of software […]
Omnet++, Research, Unrestricted Articles
Installing Castalia on OmNet++ for WSN and BAN Simulations.

Body Sensor Network A body area network (BAN), also referred to as a wireless body area network (WBAN) or a body sensor network (BSN) or a medical body area network […]
Omnet++, Research, Restricted Articles
Simulation of 5G Networks under Omnet++ and Simu5G simulator

Simu5G is the evolution of the popular SimuLTE 4G network simulator that incorporates 5G New Radio access[1]. It is based on the OMNeT++ framework, written in C++ and is fully customizable with […]
Omnet++, Research, Unrestricted Articles
Simulating And Visualizing 3D Flying Ad-hoc Network (FANET) Under Omnet++

The Flying Ad-hoc Network (FANET) FANET has emerged as an alternative access technology for regions that have no fixed infrastructure or are hard to reach. It is a group of […]
Omnet++, Research, Restricted Articles
Simulating and Visualizing 3D Underwater Wireless Sensor Network (UWSN) Under Omnet++

Underwater Wireless Sensor Networks (UWSN) UWSNs is usually made up of autonomous vehicles and individual sensor nodes that implement monitoring operations as well as storing and forwarding operations to route […]
Omnet++, Research, Restricted Articles
Vehicular Adhoc Network (VANET) Simulation With Veins + Omnet + SUMO

We can do realistic VANET simulations by combining the following three software 1. Omnet + + 2. SUMO 3. Veins Among the above three, Omnet ++ is the Network […]
Research, Unrestricted Articles
Procedure for Installing ns-3 (3.40) on New Apple Mac M1/M2.

Introduction. Always I love to build and run ns-3 simulations only on Intel-based Linux machines for ‘historical reasons’ of Intel’s multi-core performance; particularly in terms of compilation speed. So, most […]
Articles for Beginners, Articles for Research Scholars, ns-3, ns-3 Installation, Research, Unrestricted Articles
Would an AI system replace an ns-3/ns-2 Developer or an Expert?

Introduction. While starting to learn ns-3 from its very first release, it was impossible for me to understand it for some inexpressible reasons. I explained “why it took around 10 […]
Articles for Beginners, Articles for Research Scholars, ns-2, ns-3, Omnet++, Research, Unrestricted Articles
Installing Aquasim-NG in ns-3.38 and Visualizing UWSN in 3D.

Aqua-Sim Aqua-Sim is an underwater network simulator that supports a vast amount of protocols and features. Originally developed on the basis of NS-2, Aqua-Sim can effectively simulate acoustic signal attenuation […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installation of Debian 10 Buster (64 bit) chroot Jail Environment under Debian 11

Chroot based Virtualization According to Wikipedia “A chroot on Unix operating systems is an operation that changes the apparent root directory for the current running process and its children. A program that is run in such a […]
3D Network Simulations, ns-3, ns-3 Installation, Unrestricted Articles