Monthly Archives: October 2021
-
Installing ms-van3t – A Multi-Stack VANET Framework for ns-3
Introduction to “ms-van3t”. “ms-van3t” is a Multi-Stack VANET Framework module developed for ns-3. This module can be used to build and simulate ETSI-compliant VANET (V2X) applications using SUMO and ns-3[1]. […]
ns-3, ns-3 Installation, Research, Restricted Articles -
An Elementary Research on UWSN using ns-2
Introduction. Even after a lot of theoretical understanding of particular networking technology, for a beginner, understanding the way in which they are implemented in a practical system or in a […]
Articles for Research Scholars, Experiments on Ns2, ns-2, Research, Restricted Articles -
Underwater Wireless Sensor Network (UWSN) Simulation using ns-2
Introduction to Underwater Networks and Underwater Wireless Sensor Networks UAN – Underwater Acoustic Network An Underwater Acoustic Network (UAN) is a network of underwater devices that communicate with each other […]
3D Network Simulations, Experiments on Ns2, ns-2, Research, Unrestricted Articles -
Real-time Visualization of TCP cwnd, rtt, rto and ssthreshold Dynamics of a 3D FANET Scenario
Simulation of Simple 3D FANET with TCP flows under ns-3 In this example, we simulate TCP flows in a FANET scenario, but the same idea can be implemented on a […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Confusions in doing VANET simulations using DSRC/WAVE under ns-3
VANET and DSRC As a researcher, if you search the Internet for previous implementations related to VANET simulations using DSRC/WAVE you will see a lot of previously published works related […]
Articles for Research Scholars, ns-2, ns-3, Omnet++, Patching Ns-2, Research, Unrestricted Articles -
Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility
Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D
Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Installing mmWave ns-3 Extension Module to Simulate 5G Wireless Systems
Millimetre-wave(mmWave) System: Millimetre-wave (mmWave) communication systems have attracted significant interest regarding meeting the capacity requirements of the future 5G network[3]. MmWave spectrum is between 30 GHz and 300 GHz. Theoretically, […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
ns-3 VANET Simulation – 3D Visualization of 2D Gridway Mobility using NetSimulyzer
VANET Simulation and Visualization under ns-3 In fact, with default installation itself, ns-3 does not have rich support for simulating VANET. The reason is there is no fully functional DSRC […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles -
3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3
Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Installing ns3.35 in Debian 11 (Bullseye)
Installation of ns-3 Under Debian 11 (Bullseye) The ns3.35 and netanim-3.108 can be installed under Debian 11 without any problem. Important Note: Under Debian 11 (Bullseye) we should not try […]
ns-3, ns-3 Installation, Research, Unrestricted Articles -
Simulation of Multi-Tire UAV/AANET/FANET Topology Using Gauss-Markov 3D Mobility Model Under ns-3
Multi-Tier 3D FANET simulation using ‘GaussMarkovMobilityModel’ By using the ‘GaussMarkovMobilityModel’ and ‘RandomBoxPositionAllocator’, which are readily available under ns-3, we can simulate a Multi-Tier FANET. This 3-dimensional Gauss-Markov mobility model available […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Using Gauss-Markov 3D Mobility Model Under ns-3 for Simulating Unmanned Aerial Vehicle (UAV), Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET)
Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Installing ns3.35 in Debian 10 chroot Jail Under Debian 11 Host OS or any Version of Linux Host
Problems that we face during installing ns-3 under Native and Virtual Hardware/OS: The most common issues that we may face under native hardware are: The Unix/Linux variant operating system(host OS) […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles
Discuss Through WhatsApp