July, 2014 | ns-2, ns-3 Project and Research Help Forum

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

‘IEEE Projects’ – A ‘Pitfall’ in front of Real Research and Innovation.

The So-called “Base-Paper” Selection. Generally, lecturers and professors of most of the colleges and universities of India and some other Counties, expects a Post Graduate level student to do his project […]
Articles for Beginners, Articles for Research Scholars, ns-2, ns-3, Unrestricted Articles
Why People Face Problems While Installing Cygwin Under Virtualbox – Particularly for ns2

If you search for help regarding the installation of Cygwin, particularly for the installation of ns2, you will come to know about a lot of bad experiences of previous researchers or students. The […]
ns-2, Ns-2 Installation, Unrestricted Articles
Procedure for Installing and Running a Model in OPNET

You can run any sample models downloaded from the internet within a day or two by carefully reading the steps mentioned in this tutorial. Step 1: extract/copy any downloaded model […]
Research, Unrestricted Articles
Procedure for installing NIST WiMax Extentions on an old ns-2

NIST WiMax Extention The model currently implemented by NIST is based on the IEEE 802.16 standard (802.16-2004) and the mobility extension 80216e-2005. The features not implemented can be put into […]
ns-2, Unrestricted Articles
Installing ns2.31

Here we assume that the student is a Graduate/research level student with elementary knowledge of Linux and ns2. For installation of Linux and ns2.31, refer internet for the procedure for […]
Ns-2 Installation, Unrestricted Articles
Patching a old ns2 version for SWARM Routing Agent

Here we assume that the student is a Graduate level/research level student with an elementary knowledge of Linux/Cygwin and ns2. (The given procedure is for ns2.26 only – refer to […]
Patching Ns-2, Unrestricted Articles
Visualization of Energy Model Under Network Animator (NAM) -ns2

The following NAM instanced of a typical wireless sensor network simulation shows the Visualization of Energy of the Nodes. The following is a 30 Node Scenario using Directed Diffusion Protocol. […]
Experiments on Ns2, Research, Unrestricted Articles
Simulation of Priority Based Admission Control Mechanism of 802.11e Under ns2

Admission control Admission control is a network Quality of Service (QoS) procedure. Admission control determines how bandwidth and latency are allocated to streams with various requirements. Admission control schemes, therefore, […]
Experiments on Ns2, Unrestricted Articles
Generating Mobility Pattern files (also known as scenario files)

The following steps show the way of generating mobility pattern files (also known as scenario files) using the setdest command which is available under ns2 installation : (Do not […]
General Ns2 related issues, Unrestricted Articles
Installing the tcp agent ‘tcpLinux’ under any old version of ns2

The following procedure shows the steps for installing the TCP agent ‘tcpLinux’ under any old version of ns2 (the latest version of ns2 will contain this tcp agent by default) […]
Patching Ns-2, Unrestricted Articles
How to do ns2 trace analysis under Matlab using Tracegraph Tool

Tracegraph tool can be used to do trace analysis on trace output of a single run of the simulation. So it is an elementary thing. It is only to demonstrate […]
Articles for Beginners, ns-2, Unrestricted Articles
Patching old version of ns2 for installing DCCP Protocol

The DCCP Patching proceedure This is a simple procedure but it may consume few minutes / few weeks or even few months for an average student/scholar. Note: dccp is not readily available in […]
Patching Ns-2, Unrestricted Articles
Procedure for Installing TCP Westwood on an old ns-2

Installing tcp-westwood 1. Add the modules tcp-westwood.cc and tcp-westwood.h to the main NS-2 directory (which is something like: ../ns-allinone-2.28/ns-2.28 /tcp 2. Modify the Makefile so that it compiles and links […]
Patching Ns-2, Unrestricted Articles
Patching TORA Manet Routing Protocol

Here we assume that the student is a PG level/research level student with an elementary knowledge of Linux and ns2. (The given procedure is meant for ns2.28 only – for […]
Ns-2 Installation, Patching Ns-2, Unrestricted Articles
Installing ns2.28

Installing ns2.28 Here we assume that the student is a PG level/research level student with an elementary knowledge of Linux and ns2. The given procedure is for ns2.28 only. If […]
Ns-2 Installation, Unrestricted Articles