IoT
-
Sending ICMP Traffic From an ns-3-FdNetDevice Node to a Real Host Over a Real Channel
Declaration: This is nothing but a log of my experiments. There may be a correct/standard way of resolving this problem. But, here, I am presenting my own experiment and a […]
ns-3, ns-3 Installation, Research, Restricted Articles -
Installing NetSimulyzer for Visualising IoD_Sim FANET in 3D.
IoD_Sim IoD_Sim is an open source and system-level simulator for the IoD (Internet of Drones). It is developed on top of the well-known ns-3 (Network Simulator 3), it implements the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles -
Installing Internet of Drones Simulator (IoD_Sim) in Debian
In [1], the authors abstractly explain IoD and their IoD_Sim as follows: “The Internet of Drones (IoD) is a networking architecture that stems from the interplay between Unmanned Aerial Vehicles […]
ns-3, ns-3 Installation, Research, Restricted Articles -
Installing ns3-sigfox module under ns3.33 by using ns-3-dev.
Low-power wide-area network (LPWAN). Sigfox is a low-power, wide-area network (LPWAN) technology designed for connecting devices and sensors to the internet of things (IoT). It operates on licensed cellular bands, […]
ns-3, ns-3 Installation, Research, Restricted Articles -
Installing ns3-sigfox on higher versions of ns-3 using CMake
Low-power wide-area network (LPWAN). Sigfox was a French global network operator founded in 2010 that built wireless networks to connect low-power objects such as electricity meters and smartwatches, which need […]
ns-3, ns-3 Installation, Research, Restricted Articles -
Simulating WSN/IoT Systems under ns-3 using NB-IoT Module.
Low-power wide-area network (LPWAN). NB-IoT (Narrowband Internet of Things) is a low-power, wide-area network (LPWAN) technology designed for connecting devices and sensors to the internet of things (IoT). It operates […]
ns-3, ns-3 Installation, Research, Restricted Articles -
Low-power wide-area networks(LPWAN) & Internet of Things(IoT)
Low-power wide-area network (LPWAN). In fact, LPWAN emerged in 2013 and not denoting any particular technological solution, it serves as a generic term to refer to a class of network […]
ns-3, Omnet++, Research, Unrestricted Articles -
Using Arduino IDE for doing ESP8266 – WeMos D1 mini WiFi Projects
Note: This article is nothing but my experimental/learning log. Since it is not related to any serious research or research simulation, no further support will be provided on this area. […]
Electronics, Restricted Articles -
Using NODEMCU – ESP8266 Wifi with Arduino IDE for IoT Projects and Experiments.
Note: This article is nothing but my experimental/learning log. Since it is not related to any serious research or research simulation, no further support will be provided on this area. […]
Electronics, Unrestricted Articles -
Installing FLoRa under OMNet++ for doing IoT ADR Simulation.
FLoRa – Framework for LoRa FLoRa (Framework for LoRa) is a simulation framework developed by Mariusz Slabicki, Gopika Premsankar for carrying out end-to-end simulations for LoRa networks. It is based […]
Omnet++, Research, Restricted Articles -
Simulation and Analysis of IoT LoRaWAN Networks Under ns-3
Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]
ns-3, ns-3 Installation, Research, Restricted Articles
Discuss Through WhatsApp