FANET | ns-2, ns-3 Project and Research Help Forum

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Installing NetSimulyzer for Visualising IoD_Sim FANET in 3D.

IoD_Sim IoD_Sim is an open source and system-level simulator for the IoD (Internet of Drones). It is developed on top of the well-known ns-3 (Network Simulator 3), it implements the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Visualizing ns-3 FANET 3D Paparazzi Mobility Model Scenario Using NetSimylyzer

Paparazzi Mobility Model It is a mobility model to simulate the movement of autonomous vehicles, such as drones or UAVs (unmanned aerial vehicles), in a virtual environment. It allows users […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Using The Paparazzi Mobility Model in ns-3 FANET 3D Scenario

Paparazzi Mobility Model It is a mobility model to simulate the movement of autonomous vehicles, such as drones or UAVs (unmanned aerial vehicles), in a virtual environment. It allows users […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Trace Analysis of TCP Flows Under ns-3 MANET/ FANET/ VANET/ WSN Scenario

Simulation of Simple 3D FANET with TCP flows under ns-3 In this example, we simulate TCP flows in a FANET scenario, but the same idea can be implemented on a […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Real-time Visualization of TCP cwnd, rtt, rto and ssthreshold Dynamics of a 3D FANET Scenario

Simulation of Simple 3D FANET with TCP flows under ns-3 In this example, we simulate TCP flows in a FANET scenario, but the same idea can be implemented on a […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulation of Multi-Tire UAV/AANET/FANET Topology Using Gauss-Markov 3D Mobility Model Under ns-3

Multi-Tier 3D FANET simulation using ‘GaussMarkovMobilityModel’ By using the ‘GaussMarkovMobilityModel’ and ‘RandomBoxPositionAllocator’, which are readily available under ns-3, we can simulate a Multi-Tier FANET. This 3-dimensional Gauss-Markov mobility model available […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Using Gauss-Markov 3D Mobility Model Under ns-3 for Simulating Unmanned Aerial Vehicle (UAV), Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET)

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulating And Visualizing 3D Flying Ad-hoc Network (FANET) Under Omnet++

The Flying Ad-hoc Network (FANET) FANET has emerged as an alternative access technology for regions that have no fixed infrastructure or are hard to reach. It is a group of […]
Omnet++, Research, Restricted Articles
Simulating And Visualizing 3D Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET) Under ns-3

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Internet of Drones Simulator (IoD_Sim) in Debian

In [1], the authors abstractly explain IoD and their IoD_Sim as follows: “The Internet of Drones (IoD) is a networking architecture that stems from the interplay between Unmanned Aerial Vehicles […]
ns-3, ns-3 Installation, Research, Restricted Articles
Do not waste your time with ‘paper-ware’ models and algorithms.

A. Introduction. Definitely, we are not talking about ‘paperware’ that you see near to this paragraph!. Most of the published journal papers only talk about some imaginary thing. If the […]
Articles for Research Scholars, Electronics, ns-2, ns-3, Omnet++, Research, Unrestricted Articles
Installation of Debian 10 Buster (64 bit) chroot Jail Environment under Debian 11

Chroot based Virtualization According to Wikipedia “A chroot on Unix operating systems is an operation that changes the apparent root directory for the current running process and its children. A program that is run in such a […]
3D Network Simulations, ns-3, ns-3 Installation, Unrestricted Articles
Simulation of UAV based Search and Rescue Scenario with ns-3

Drones enable a significant enhancement in Search and Rescue (SAR) operations. Drones are a potentially life-saving tool in SAR operations, providing critical support to SAR teams to reduce risk to […]
3D Network Simulations, ns-3, Research, Restricted Articles
Cmake based ns-3.37 install in Debian 11 chroot Environment

ns-3.37 was released on November 1, 2022 with some interesting updates and features and the base coding style was updated, resulting in a large number of style and whitespace changes[1]. […]
ns-3, ns-3 Installation, Research, Restricted Articles
Generating Genuine, Quality Tables & Graphs for Publication.

Based on my experience and interactions with lots of intelligent scholars from different parts of the world, I can definitely say that a Quality Table of results and a good […]
Articles for Research Scholars, ns-2, ns-3, Omnet++, Research, Restricted Articles