Research | ns-2, ns-3 Project and Research Help Forum

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Installing mmWave ns-3 Extension Module to Simulate 5G Wireless Systems

Millimetre-wave(mmWave) System: Millimetre-wave (mmWave) communication systems have attracted significant interest regarding meeting the capacity requirements of the future 5G network[3]. MmWave spectrum is between 30 GHz and 300 GHz. Theoretically, […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
ns-3 VANET Simulation – 3D Visualization of 2D Gridway Mobility using NetSimulyzer

VANET Simulation and Visualization under ns-3 In fact, with default installation itself, ns-3 does not have rich support for simulating VANET. The reason is there is no fully functional DSRC […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles
3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns3.35 in Debian 11 (Bullseye)

Installation of ns-3 Under Debian 11 (Bullseye) The ns3.35 and netanim-3.108 can be installed under Debian 11 without any problem. Important Note: Under Debian 11 (Bullseye) we should not try […]
ns-3, ns-3 Installation, Research, Unrestricted Articles
Simulation of Multi-Tire UAV/AANET/FANET Topology Using Gauss-Markov 3D Mobility Model Under ns-3

Multi-Tier 3D FANET simulation using ‘GaussMarkovMobilityModel’ By using the ‘GaussMarkovMobilityModel’ and ‘RandomBoxPositionAllocator’, which are readily available under ns-3, we can simulate a Multi-Tier FANET. This 3-dimensional Gauss-Markov mobility model available […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Using Gauss-Markov 3D Mobility Model Under ns-3 for Simulating Unmanned Aerial Vehicle (UAV), Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET)

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns3.35 in Debian 10 chroot Jail Under Debian 11 Host OS or any Version of Linux Host

Problems that we face during installing ns-3 under Native and Virtual Hardware/OS: The most common issues that we may face under native hardware are: The Unix/Linux variant operating system(host OS) […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles
Simulating And Visualizing 3D Mobile Underwater Sensor Network (UWSN) Under ns-3

Underwater acoustic communication [1] : Underwater acoustic communication is a technique of sending and receiving messages below water. There are several ways of employing such communication but the most common […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulating And Visualizing 3D Flying Ad-hoc Network (FANET) Under Omnet++

The Flying Ad-hoc Network (FANET) FANET has emerged as an alternative access technology for regions that have no fixed infrastructure or are hard to reach. It is a group of […]
Omnet++, Research, Restricted Articles
Simulating and Visualizing 3D Underwater Wireless Sensor Network (UWSN) Under Omnet++

Underwater Wireless Sensor Networks (UWSN) UWSNs is usually made up of autonomous vehicles and individual sensor nodes that implement monitoring operations as well as storing and forwarding operations to route […]
Omnet++, Research, Restricted Articles
Simulating And Visualizing 3D Aerial Ad-hoc Network (AANET) and Flying Ad-hoc Network (FANET) Under ns-3

Unmanned Aerial Vehicle (UAV) Unmanned Aerial Vehicle (UAV) networks play important role in the future generations of wireless networks. Due to the high cost and failures involved in real system […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Omnet++ in Debian 9 chroot Jail Under Debian 11 Host OS

Problems in installing Omnet++ under Native and Virtual Hardware/OS: The most common issues that we may face under native hardware a re: The Unix/Linux variant operating system(host OS) that is […]
Research, Restricted Articles
Installing NetSimulyzer 3D Visualization Tool Under Linux Virtual Guest Operating System Environment

NetSimulyzer 3D Visualization Tool: The NetSimulyzer 3D visualization tool can be used to play/animate/visualize ns-3 network scenarios for better understanding, presenting and debugging them. While trying to install the NetSimulyzer […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Faking ‘qt5-default’ package on Debian 11 for Installing NetSimulyzer 3D Visualization Tool

NetSimulyzer 3D Visualization Tool: The NetSimulyzer 3D visualization tool can be used to play/animate/visualize ns-3 network scenarios for better understanding, presenting and debugging them. While trying to install the NetSimulyzer […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing NetSimulyzer 3D Visualization Tool under Debian/Ubuntu

NetSimulyzer 3D Visualization Tool In fact, ‘NetSimulyzer’ consists of two parts. One is the actual 3D visualization tool and the other is an ns-3 companion module. Both are named as […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Unrestricted Articles