ns-2, ns-3, Omnet++ related Articles for Research Scholars

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Doing Research in Public Safety Communication using psc-ns3.

Public Safety Communications (PSC) in ns-3. The support for public safety communications (PSC) in ns-3 relies on the newer capabilities introduced in 3GPP Release 12 and subsequent releases for 4G […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns-2 on Linux System with the Latest gcc Compiler

In fact, while compiling ns-2-allinone package, generally it will expect a very old compiler like gcc4 or gcc5. If you search the internet[2] for compilation issues of ns-2, probably you […]
Experiments on Ns2, ns-2, Ns-2 Installation, Research, Restricted Articles
RAN, O-RAN, ns-O-RAN and Traffic Steering in 5G Networks.

RAN (Radio Access Network) RAN is a key component of a cellular network that provides radio connectivity between mobile devices (such as smartphones, tablets, or IoT devices) and the core […]
ns-3, Research, Unrestricted Articles
Sending ICMP Traffic From an ns-3-FdNetDevice Node to a Real Host Over a Real Channel

Declaration: This is nothing but a log of my experiments. There may be a correct/standard way of resolving this problem. But, here, I am presenting my own experiment and a […]
ns-3, ns-3 Installation, Research, Restricted Articles
Realistic 3D Visualization of UWSN Scenario with NetSimulyzer

Aqua-Sim Aqua-Sim is an underwater network simulator that supports a vast amount of protocols and features. Originally developed on the basis of NS-2, Aqua-Sim can effectively simulate acoustic signal attenuation […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Aquasim-NG in ns-3.38 and Visualizing UWSN in 3D.

Aqua-Sim Aqua-Sim is an underwater network simulator that supports a vast amount of protocols and features. Originally developed on the basis of NS-2, Aqua-Sim can effectively simulate acoustic signal attenuation […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing NetSimulyzer for Visualising IoD_Sim FANET in 3D.

IoD_Sim IoD_Sim is an open source and system-level simulator for the IoD (Internet of Drones). It is developed on top of the well-known ns-3 (Network Simulator 3), it implements the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Internet of Drones Simulator (IoD_Sim) in Debian

In [1], the authors abstractly explain IoD and their IoD_Sim as follows: “The Internet of Drones (IoD) is a networking architecture that stems from the interplay between Unmanned Aerial Vehicles […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing sns3-satellite network extension module under ns-3

Satellite Network Simulator 3 Satellite Network Simulator 3 (SNS3) is an open-source network simulator specifically designed for satellite communication networks. It provides a platform for simulating and analyzing various aspects […]
3D Network Simulations, ns-3, Research, Restricted Articles
Visualizing ns-3 LEO Satellite Network using NetSimulyzer 3D

Introduction to Low Earth Orbit (LEO). A Low Earth Orbit (LEO) satellite network is a type of satellite communication system where satellites are placed in low Earth orbits, typically at […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulating LEO Satellite Network using ns-3 LEO Module

Introduction to Low Earth Orbit (LEO). A Low Earth Orbit (LEO) satellite network is a type of satellite communication system where satellites are placed in low Earth orbits, typically at […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Flutter, VS Code and Android Studio on Debian 11

Flutter, Dart, and Andriod Studio are specifically used for mobile application development. When you install Flutter, you also get the Dart SDK installed on your system. This means that you […]
Articles for Beginners, Restricted Articles
Rich Tracing Features available in ns-3 – Really a Strength? Or Weakness?

Introduction. Without any doubt, ns-3 has rich tracing support—it has more tracing features than any other simulator. Most above all, it has an excellent mechanism for grabbing any event from […]
Articles for Research Scholars, ns-3, Research, Unrestricted Articles
Using 3D obstacle-compliant 3D-mobility models under ns-3.37

Mobility Models for UAV To facilitate 3D for testing UAV systems, [1] presents different mobility models for the emulation of the movement of a UAV. The GitHub repository[2] contains the […]
ns-3, ns-3 Installation, Research, Restricted Articles
Do not waste your time with ‘paper-ware’ models and algorithms.

A. Introduction. Definitely, we are not talking about ‘paperware’ that you see near to this paragraph!. Most of the published journal papers only talk about some imaginary thing. If the […]
Articles for Research Scholars, Electronics, ns-2, ns-3, Omnet++, Research, Unrestricted Articles