Restricted Articles | ns-2, ns-3 Project and Research Help Forum

Installing ‘lorawan’ extension module version v0.3.1 under ns-3.42

LoRaWAN The LoRa Alliance first defined the LoRaWAN standard with the objective of creating a medium access scheme and a set of network management policies that leverage the properties of […]

Simulation and Analysis of IoT LoRaWAN Networks Under ns-3

Low-power wide-area network (LPWAN). These networks use low-power radio signals, such as those in the sub-1 GHz range, to send small amounts of data over a large area. LPWANs are […]

Creating Random Road Network, Traffic Flows, Signals in SUMO

SUMO has different tools for creating and customizing road networks and traffic flows and traffic signals. In this article, we will use some of those tools available in SUMO to […]

Implementation of Spring Mobility Model for ns-3 and Visualizing it in 3D along with Circle Mobility

Spring Mobility Spring mobility is nothing but making a node to move in a path similar to that of an expanded circular coil spring. From the top or bottom point […]

Implementation of Circle Mobility Model for ns-3 and Visualizing it in 3D

Mobility Models of ns-3. The default ns-3 installation will contain the following mobility models. MobilityModel Subclasses ConstantPosition ConstantVelocity ConstantAcceleration GaussMarkov Hierarchical RandomDirection2D RandomWalk2D RandomWaypoint SteadyStateRandomWaypoint Waypoint PositionAllocator Position allocators […]

3D Aquatic Animal Tracking Underwater Network Simulation (UWSN) Under ns-3

Aquatic Animal Tracking: Tracking marine animals can be extremely tricky due to GPS signals not functioning well underwater[1]. Underwater acoustic communication is a technique of sending and receiving messages below […]

Realistic 3D Visualization of UWSN Scenario with NetSimulyzer

Aqua-Sim Aqua-Sim is an underwater network simulator that supports a vast amount of protocols and features. Originally developed on the basis of NS-2, Aqua-Sim can effectively simulate acoustic signal attenuation […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Aquasim-NG in ns-3.38 and Visualizing UWSN in 3D.

Aqua-Sim Aqua-Sim is an underwater network simulator that supports a vast amount of protocols and features. Originally developed on the basis of NS-2, Aqua-Sim can effectively simulate acoustic signal attenuation […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing NetSimulyzer for Visualising IoD_Sim FANET in 3D.

IoD_Sim IoD_Sim is an open source and system-level simulator for the IoD (Internet of Drones). It is developed on top of the well-known ns-3 (Network Simulator 3), it implements the […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Internet of Drones Simulator (IoD_Sim) in Debian

In [1], the authors abstractly explain IoD and their IoD_Sim as follows: “The Internet of Drones (IoD) is a networking architecture that stems from the interplay between Unmanned Aerial Vehicles […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing sns3-satellite network extension module under ns-3

Satellite Network Simulator 3 Satellite Network Simulator 3 (SNS3) is an open-source network simulator specifically designed for satellite communication networks. It provides a platform for simulating and analyzing various aspects […]
3D Network Simulations, ns-3, Research, Restricted Articles
Visualizing ns-3 LEO Satellite Network using NetSimulyzer 3D

Introduction to Low Earth Orbit (LEO). A Low Earth Orbit (LEO) satellite network is a type of satellite communication system where satellites are placed in low Earth orbits, typically at […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Simulating LEO Satellite Network using ns-3 LEO Module

Introduction to Low Earth Orbit (LEO). A Low Earth Orbit (LEO) satellite network is a type of satellite communication system where satellites are placed in low Earth orbits, typically at […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles
Installing Flutter, VS Code and Android Studio on Debian 11

Flutter, Dart, and Andriod Studio are specifically used for mobile application development. When you install Flutter, you also get the Dart SDK installed on your system. This means that you […]
Articles for Beginners, Restricted Articles
Using 3D obstacle-compliant 3D-mobility models under ns-3.37

Mobility Models for UAV To facilitate 3D for testing UAV systems, [1] presents different mobility models for the emulation of the movement of a UAV. The GitHub repository[2] contains the […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns3-sigfox module under ns3.33 by using ns-3-dev.

Low-power wide-area network (LPWAN). Sigfox is a low-power, wide-area network (LPWAN) technology designed for connecting devices and sensors to the internet of things (IoT). It operates on licensed cellular bands, […]
ns-3, ns-3 Installation, Research, Restricted Articles
Installing ns3-sigfox on higher versions of ns-3 using CMake

Low-power wide-area network (LPWAN). Sigfox was a French global network operator founded in 2010 that built wireless networks to connect low-power objects such as electricity meters and smartwatches, which need […]
ns-3, ns-3 Installation, Research, Restricted Articles
Simulating WSN/IoT Systems under ns-3 using NB-IoT Module.

Low-power wide-area network (LPWAN). NB-IoT (Narrowband Internet of Things) is a low-power, wide-area network (LPWAN) technology designed for connecting devices and sensors to the internet of things (IoT). It operates […]
ns-3, ns-3 Installation, Research, Restricted Articles
Using World Ocean Simulation System (WOSS) library with ns-3

World Ocean Simulation System (WOSS) “WOSS is a multi-threaded C++ framework that permits the integration of any existing underwater channel simulator that expects environmental data as input and provides as […]
Ns-2 Installation, ns-3, ns-3 Installation, Research, Restricted Articles
Simulation of UAV based Search and Rescue Scenario with ns-3

Drones enable a significant enhancement in Search and Rescue (SAR) operations. Drones are a potentially life-saving tool in SAR operations, providing critical support to SAR teams to reduce risk to […]
3D Network Simulations, ns-3, Research, Restricted Articles
Installing NetSimulyzer 3D Visualization Tool under Debian 11

NetSimulyzer 3D Visualization Tool In fact, ‘NetSimulyzer’ consists of two parts. One is the actual 3D visualization tool and the other is an ns-3 companion module. Both are named as […]
3D Network Simulations, ns-3, ns-3 Installation, Research, Restricted Articles